DN20 (¾”) Cold Water Meters
DN20 (¾”) cold water meters are threaded meters connected to a 3/4-inch pipe with couplings; the external thread on the meter body is G1 B. In this size, models with 110 mm, 130 mm and 190 mm body lengths are available; when replacing a meter, measure the length of the existing meter without the couplings and choose the same length.
Cold water meters are not used on hot water lines; for the hot water line of a central system, see the DN20 Hot Water Meters category. Check your local regulations for periodic re-verification requirements.
DN20 Cold Water Meter Models
| Model | Type | Body length (L) | Q3 (m³/h) |
|---|---|---|---|
| Klepsan KVS-2K | Dry-dial, multi-jet | 190 mm | 2.5 |
| Klepsan KVS-12K | Dry-dial, multi-jet | 110 mm | 2.5 |
| Klepsan İSKİ 2K | Dry-dial, multi-jet | 190 mm | 2.5 |
| Klepsan KVS-12K Aqua Plus | Dry-dial, multi-jet | 110 mm | 2.5 |
| Klepsan KVS-2K Aqua Plus | Dry-dial, multi-jet | 190 mm | 2.5 |
| Minol Zenner ETKD | Single-jet, dry-dial | 130 mm | 2.5 / 4 |
| CEM KT13 | Single-jet, dry-dial | 110 mm | 2.5 |
Other sizes: Cold water meters (threaded) · All water meters