DN25 (1”) Cold Water Meters
DN25 (1”) cold water meters are threaded meters connected to a 1-inch pipe with couplings; the external thread on the meter body is G1¼ B. In this size, models with a 260 mm body length are available; when replacing a meter, measure the length of the existing meter without the couplings and choose the same length.
Cold water meters are not used on hot water lines; for the hot water line of a central system, see the DN25 Hot Water Meters category. Check your local regulations for periodic re-verification requirements.
DN25 Cold Water Meter Models
| Model | Type | Body length (L) | Q3 (m³/h) |
|---|---|---|---|
| Klepsan KVS-16K | Dry-dial, multi-jet | 260 mm | 6.3 |
| Klepsan İSKİ 16K | Dry-dial, multi-jet | 260 mm | 6.3 |
| Minol Zenner MTKD-M | Multi-jet, dry-dial | 260 mm | 6.3 / 10 |
Other sizes: Cold water meters (threaded) · All water meters
MTKD-M, Multi-Jet Dry-Dial Cold Water Meter, DN25 (1”), Q3 6.3 / 10 m³/h, L 260 mm, up to 50 °C, R160 Horizontal / R40–50 Vertical, Without Module or with Pulse / M-Bus / wM-Bus Module, MID
KVS-16K, Dry-Dial Multi-Jet Cold Water Meter, DN25 (1”), Q3 6.3 m³/h, L 260 mm, up to 50 °C, Horizontal Installation, Pulse Output Optional, MID
İSKİ 16K, Dry-Dial Multi-Jet Cold Water Meter, DN25 (1”), Q3 6.3 m³/h, L 260 mm, up to 50 °C, Horizontal Installation, Optional Pulse Output
EW1100CC2800, SJ Water Meter Q3=6.3,DN25,Max 30°C, Connection type: G 1 1/4, Operating pressure (max.): 16 bar, Medium: Drinking water
EW1100CM2800, SJ Water Meter Q3=6.3-DN25-L260-T30-MBUS, Connection type: G 1 1/4, Operating pressure (max.): 16 bar, Medium: Drinking water