DN25 (1”) Hot Water Meters
DN25 (1”) hot water meters are threaded meters connected to a 1-inch pipe with couplings; the external thread on the meter body is G1¼ B. In this size, models with a 260 mm body length are available; when replacing a meter, measure the length of the existing meter without the couplings and choose the same length.
Hot water meters measure the hot water used by apartments and building blocks in buildings with a central system; for the cold water line, see the DN25 Cold Water Meters category.
DN25 Hot Water Meter Models
| Model | Type | Body length (L) | Q3 (m³/h) |
|---|---|---|---|
| Klepsan KVS-16S | Dry-dial, multi-jet | 260 mm | 6.3 |
| Minol Zenner MTWD-M-CC | Multi-jet, dry-dial | 260 mm | 6.3 / 10 |
Other sizes: Hot water meters (threaded) · All water meters
MTWD-M-CC, Multi-Jet Dry-Dial Hot Water Meter, DN25 (1”), Q3 6.3 / 10 m³/h, L 260 mm, up to 90 °C, R80 Horizontal / R40 Vertical, IP68, Without Module or with Pulse / M-Bus / wM-Bus Module, MID
KVS-16S, Dry-Dial Multi-Jet Hot Water Meter, DN25 (1”), Q3 6.3 m³/h, L 260 mm, up to 90 °C, Horizontal Installation, Pulse Output Optional, MID
EW1101CC2800, SJ Water Meter Q3=6.3,DN25,Max 90°C, Connection type: G 1 1/4, Operating pressure (max.): 16 bar, Medium: Drinking water
EW1101CM2800, SJ Water Meter Q3=6.3-DN25-L260-T130-MBUS