Novus Manifolds — Custom Manifold Manufacturing

Novus Manifolds are supply and return (distribution and collection) manifolds made to the dimensions of your project from PP-R, HDPE, stainless steel (AISI 304/316), hot-dip galvanized steel and black steel pipe. You specify the header diameter, length, number/size of branches and connection type; we prepare the technical drawing and the price quotation.

• Header size: Ø63–Ø400 (PP-R/HDPE) · DN50–DN500 (metal)
• Material: PP-R · HDPE · Stainless steel · Galvanized steel · Black steel
• Length and branches: project-specific, no limits
• Connections: weld end · threaded · union · flanged · with valve
• Price: project-specific quotation

Design your own manifold → Choose the dimensions, view your A4 technical drawing and 3D model, and get a quote via WhatsApp.

What is a manifold?

A manifold is a piping component that distributes the flow from a main line to several circuits (supply manifold) or collects the water from several circuits into a single line (return manifold). The large header cross-section slows the flow down, so each branch draws its own flow evenly, and pressure loss and noise are reduced. Boiler rooms usually use a supply manifold and a return manifold together.

Manifold types and material comparison

What we deliver with Novus manifold manufacturing

• Project-specific dimensions: header diameter, length, number/size of branches, center-to-center spacing and outlet directions according to your drawing.
• Technical drawing: an A4 landscape technical drawing from the configurator (chain dimensions, parts list, title block) as PDF/PNG/SVG.
• 3D model: rotate and inspect the product before it goes into production.
• Capacity check: calculation of flow rate and cross-section ratio, with a recommendation for the next size up if needed.
• Complete delivery: with options for valves, pockets, support legs, brackets, insulation and labeling.

Manifold applications

boiler rooms · water meter banks · heating–cooling lines · solar thermal installations · housing developments · industrial installations

Manifold selection in three steps

1. Flow rate: Q (m³/h) = P (kW) / (1.163 × ΔT).
2. Header diameter: from Q = A × v × 3600, with v = 1.0–1.5 m/s.
3. Cross-section check: header cross-section ≥ 1.5 × total branch cross-section.

The manifold configurator performs all three steps automatically; you will find worked examples in the selection guide.

Find the manifold type you need

Manifolds are usually searched for by the job they do rather than by their material. The headings below take you straight to the relevant size and material; if you know the dimensions, you can draw your own manifold on the design page.

• Galvanized water manifold — domestic water risers · hot-dip galvanized
• Water meter manifold — apartment meter banks, union outlets
• Heating water manifold — boiler room supply–return set
• Hot water manifold — water heater outlet, recirculation · stainless steel or PP-R
• Cold water manifold — mains, tank and pump outlet · HDPE or galvanized steel
• Boiler room manifold — hydraulic separator, pump group and riser distribution
• Industrial manifold — process water, cooling towers, pump suction–discharge
• Underfloor heating manifold — ready-made manifolds with flow meters are in a separate category

Frequently asked questions

Last updated: September 20, 2026 · Prepared by: Novus Energy technical team — manifold manufacturing and metering systems. For size and capacity verification: WhatsApp or +90 216 642 42 66.