Novus Digitermo Heat Meters and Meter Reading Products
Digitermo heat meters: the Novus-branded Digitermo DTL series ultrasonic heat meters are available in DN20, DN25, DN32 and DN40.
The Novus DFN-M500 M-Bus converter is used to read the meters on an M-Bus line via GSM, WiFi or USB and is suitable for bulk meter reading over long cable runs.
After installation, Novus Energy also provides remote meter reading and heat cost allocation for the heat meters it supplies. For periodic re-verification requirements, check your local regulations. To compare all brands, see our heat meter prices page.
DTL Serisi Ultrasonik Isı Sayacı, M-Bus, Dönüş Hattı, Isıtma/Soğutma, DN20 3/4’’ Qn: 2,5 m3/h, Dişli, 130mm, 1,5m Standart PT1000 Sensör, Türkiye MID, Class 2
DTL-DN25, Ultrasonic Heat Meter, M-Bus (Wired), Installation: Return line, Application: Heating and cooling, Body: DN25 (1”), Nominal Flow Qn: 3.5 m³/h, Connection Size: 1¼” Thread, Body Length L: 160 mm, PT1000 Sensor, MID (Türkiye), Class 2
DTL-DN32, Ultrasonic Heat Meter, M-Bus (Wired), Installation: Return line, Application: Heating and cooling, Body: DN32 (1¼”), Nominal Flow Qn: 6 m³/h, Connection Size: 1½” Thread, Body Length L: 180 mm, PT1000 Sensor, MID (Türkiye), Class 2
DTL-DN40, Ultrasonic Heat Meter, M-Bus (Wired), Installation: Return line, Application: Heating and cooling, Body: DN40 (1½”), Nominal Flow Qn: 10 m³/h, Connection Size: 2” Thread, Body Length L: 200 mm, PT1000 Sensor, MID (Türkiye), Class 2
Ø355 mm body · inner diameter 290 mm · recommended flow 238.5 – 357.8 m³/h · 5.55 – 8.32 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN500 body · inner diameter 500 mm · recommended flow 706.9 – 1,060.3 m³/h · 16.44 – 24.66 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN400 body · inner diameter 400 mm · recommended flow 452.4 – 678.6 m³/h · 10.52 – 15.78 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN300 body · inner diameter 300 mm · recommended flow 254.5 – 381.7 m³/h · 5.92 – 8.88 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN250 body · inner diameter 250 mm · recommended flow 176.7 – 265.1 m³/h · 4.11 – 6.17 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN200 body · inner diameter 200 mm · recommended flow 113.1 – 169.6 m³/h · 2.63 – 3.95 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN150 body · inner diameter 150 mm · recommended flow 63.6 – 95.4 m³/h · 1.48 – 2.22 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN125 body · inner diameter 125 mm · recommended flow 44.2 – 66.3 m³/h · 1.03 – 1.54 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN100 body · inner diameter 100 mm · recommended flow 28.3 – 42.4 m³/h · 658 – 986 kW at ΔT 20 K. Length, branches and connection type are project-specific.
DN80 body · inner diameter 80 mm · recommended flow 18.1 – 27.1 m³/h · 421 – 631 kW at ΔT 20 K. Length, branches and connection type are project-specific.
DN65 body · inner diameter 65 mm · recommended flow 11.9 – 17.9 m³/h · 278 – 417 kW at ΔT 20 K. Length, branches and connection type are project-specific.
DN50 body · inner diameter 50 mm · recommended flow 7.1 – 10.6 m³/h · 164 – 247 kW at ΔT 20 K. Length, branches and connection type are project-specific.
DN500 body · inner diameter 500 mm · recommended flow 706.9 – 1,060.3 m³/h · 16.44 – 24.66 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN400 body · inner diameter 400 mm · recommended flow 452.4 – 678.6 m³/h · 10.52 – 15.78 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN300 body · inner diameter 300 mm · recommended flow 254.5 – 381.7 m³/h · 5.92 – 8.88 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN250 body · inner diameter 250 mm · recommended flow 176.7 – 265.1 m³/h · 4.11 – 6.17 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN200 body · inner diameter 200 mm · recommended flow 113.1 – 169.6 m³/h · 2.63 – 3.95 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN150 body · inner diameter 150 mm · recommended flow 63.6 – 95.4 m³/h · 1.48 – 2.22 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN125 body · inner diameter 125 mm · recommended flow 44.2 – 66.3 m³/h · 1.03 – 1.54 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN100 body · inner diameter 100 mm · recommended flow 28.3 – 42.4 m³/h · 658 – 986 kW at ΔT 20 K. Length, branches and connection type are project-specific.
DN80 body · inner diameter 80 mm · recommended flow 18.1 – 27.1 m³/h · 421 – 631 kW at ΔT 20 K. Length, branches and connection type are project-specific.
DN65 body · inner diameter 65 mm · recommended flow 11.9 – 17.9 m³/h · 278 – 417 kW at ΔT 20 K. Length, branches and connection type are project-specific.
DN50 body · inner diameter 50 mm · recommended flow 7.1 – 10.6 m³/h · 164 – 247 kW at ΔT 20 K. Length, branches and connection type are project-specific.
DN500 body · inner diameter 500 mm · recommended flow 706.9 – 1,060.3 m³/h · 16.44 – 24.66 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN400 body · inner diameter 400 mm · recommended flow 452.4 – 678.6 m³/h · 10.52 – 15.78 MW at ΔT 20 K. Length, branches and connection type are project-specific.
DN300 body · inner diameter 300 mm · recommended flow 254.5 – 381.7 m³/h · 5.92 – 8.88 MW at ΔT 20 K. Length, branches and connection type are project-specific.