Klepsan Water Meters, Woltman Meters and Ball Valves
Klepsan is a Turkish valve and water meter manufacturer that started production in the early 1970s in Istanbul's Perşembe Pazarı district; since 2007 it has made plumbing valves, cold, hot, Woltman and irrigation water meters and cast-iron valves in a 15,000 m² factory in the Hadımköy Organised Industrial Zone. Novus Mühendislik ve Enerji Sistemleri offers 68 Klepsan products, original and invoiced, with the manufacturer's warranty. In-stock items ordered and paid by 16:00 on a business day are dispatched the same day (shipping and delivery).
Featured categories: Klepsan Water Meters · Klepsan Ball Valves
Klepsan product families, selection guide and FAQ
| Product family | Key series / models | Typical use | Category |
|---|---|---|---|
| Threaded cold water meters (14) | KVS-K, KVS-K Aqua Plus, İSKİ 2K, 16K, 18K, 19K | Apartments, shops, building inlets, DN15–DN50 | Cold water meters |
| Threaded hot water meters (7) | KVS-3S, KVS-2S, KVS-12S, KVS-16S…19S | Domestic hot water up to 90 °C | Hot water meters |
| Flanged Woltman meters (30) | İSKİ 1W–7W, Woltman cold, KVS-WS hot, KVS-WT agricultural | Main lines and irrigation, DN50–DN250 | Woltman meters |
| Ball and gate valves (17) | Full-bore PN10–PN40, industrial, MOP 5 gas valves, gate valves | Water, heating and gas lines | Ball valves |
Threaded cold water meters
The KVS-K series are dry-dial, multi-jet mechanical meters from DN15 to DN50. The KVS-2K DN20, for example, has a G1 B thread, Q3 2.5 m³/h, 190 mm length, cold water up to 50 °C and a maximum working pressure of 16 bar. The 5-drum register is suitable for optical reading, a pulse output is optional, and the meters are MID certified and comply with EN ISO 4064. The İSKİ 2K shares the same values.
Threaded hot water meters
The KVS-S series uses the same dry-dial, multi-jet design for hot water up to 90 °C. The KVS-3S DN15 has a G¾ B thread and 165 mm length; DN20 is available as 190 mm KVS-2S and 110 mm KVS-12S, and DN25–DN50 as KVS-16S to 19S. Meters are installed horizontally.
Flanged Woltman water meters
In a Woltman meter the water turns a turbine aligned with the pipe axis, which suits high flows with low pressure loss. The İSKİ 1W DN50 has Q3 40 m³/h, R160, 200 mm length and cold water up to 50 °C. The KVS-1WS hot water model measures up to 90 °C, and the KVS-WT agricultural series (R50) is made for irrigation lines. Bodies are GG25 cast iron, IP68.
Ball and gate valves
The full-bore PN16 ball valve comes from 1/4″ to 4″: TS EN 331 approved, ISO 228 female threads, PTFE seats and EPDM O-rings, for -10 °C to +120 °C. PN10, PN25 and PN40 versions, industrial models and MOP 5 gas valves (with or without lock) are also available, as are brass full-bore gate valves.
How to choose the right product
- Size and length: measure the DN size and body length (110, 165, 190 mm) of the existing meter.
- Connection: DN15–DN50 meters are threaded, Woltman meters are flanged.
- Temperature: cold water models up to 50 °C, hot water models up to 90 °C.
- Flow: size by the permanent flow rate Q3; a higher R ratio measures low flows better.
- Reading: choose a pulse output if remote reading is planned.
Frequently asked questions
Which Klepsan meters are İSKİ approved?
Our İSKİ water meter guide lists Klepsan İSKİ 2K (DN20), İSKİ 16K (DN25) and Woltman İSKİ 1W–7W (DN50–DN200) as stamped meters of a type accepted by İSKİ, the Istanbul water utility. İSKİ 18K and 19K are also listed for DN40 and DN50.
When is a Woltman meter used?
A Woltman meter is a flanged turbine meter for large, high-flow lines. In İSKİ's tariff, DN20–DN50 are threaded multi-jet meters and flanged Woltman meters start from DN65. Klepsan cold water Woltman meters come in eight sizes from DN50 to DN250.
Up to what temperature do hot water meters measure?
Klepsan KVS-S threaded and KVS-WS Woltman hot water meters measure water up to 90 °C, while cold water models are rated up to 50 °C. A cold water meter should not be installed on a hot water line.
How often must a water meter be re-verified?
In Turkey, water meters are subject to periodic verification under Law No. 3516 on Measures and Weights, and the period is 10 years, counted from the year of the first stamp shown on the dial. A meter must also be replaced earlier if it fails, freezes, has a broken glass or a damaged seal.
Prepared by the Novus Mühendislik ve Enerji Sistemleri technical team · Updated: November 2026