DN40 (1½”) Cold Water Meters
DN40 (1½”) cold water meters are threaded meters connected to a 1 1/2-inch pipe with couplings; the external thread on the meter body is G2 B. In this size, models with a 300 mm body length are available; when replacing a meter, measure the length of the existing meter without the couplings and choose the same length.
Cold water meters are not used on hot water lines; for the hot water line of a central system, see the DN40 Hot Water Meters category. Check your local regulations for periodic re-verification requirements.
DN40 Cold Water Meter Models
| Model | Type | Body length (L) | Q3 (m³/h) |
|---|---|---|---|
| Klepsan KVS-18K | Dry-dial, multi-jet | 300 mm | 16 |
| Klepsan İSKİ 18K | Dry-dial, multi-jet | 300 mm | 16 |
| Minol Zenner MTKD-M | Multi-jet, dry-dial | 300 mm | 16 |
Other sizes: Cold water meters (threaded) · All water meters
KVS-18K, Dry-Dial Multi-Jet Cold Water Meter, DN40 (1½”), Q3 16 m³/h, L 300 mm, up to 50 °C, Horizontal Installation, Pulse Output Optional, MID
EW1100CC4600, SJ Water Meter Q3=16,DN40,Max 30°C, Connection type: G 2, Operating pressure (max.): 16 bar, Medium: Drinking water
MTKD-M, Multi-Jet Dry-Dial Cold Water Meter, DN40 (1½”), Q3 16 m³/h, L 300 mm, up to 50 °C, R160 Horizontal / R40 Vertical, Without Module or with Pulse / M-Bus / wM-Bus Module, MID
İSKİ 18K, Dry-Dial Multi-Jet Cold Water Meter, DN40 (1½”), Q3 16 m³/h, L 300 mm, up to 50 °C, Horizontal Installation, Optional Pulse Output
EW1100CM4600, SJ Water Meter Q3=16,DN40-L300-T30-MBUS, Connection type: G 2, Operating pressure (max.): 16 bar, Medium: Drinking water