DN32 (1¼”) Cold Water Meters
DN32 (1¼”) cold water meters are threaded meters connected to a 1 1/4-inch pipe with couplings; the external thread on the meter body is G1½ B. In this size, models with a 260 mm body length are available; when replacing a meter, measure the length of the existing meter without the couplings and choose the same length.
Cold water meters are not used on hot water lines; for the hot water line of a central system, see the DN32 Hot Water Meters category. Check your local regulations for periodic re-verification requirements.
DN32 Cold Water Meter Models
| Model | Type | Body length (L) | Q3 (m³/h) |
|---|---|---|---|
| Klepsan KVS-17K | Dry-dial, multi-jet | 260 mm | 10 |
| Minol Zenner MTKD-M | Multi-jet, dry-dial | 260 mm | 6.3 / 10 |
Other sizes: Cold water meters (threaded) · All water meters
MTKD-M, Multi-Jet Dry-Dial Cold Water Meter, DN32 (1¼”), Q3 6.3 / 10 m³/h, L 260 mm, up to 50 °C, R160 Horizontal / R40–50 Vertical, Without Module or with Pulse / M-Bus / wM-Bus Module, MID
KVS-17K, Dry-Dial Multi-Jet Cold Water Meter, DN32 (1¼”), Q3 10 m³/h, L 260 mm, up to 50 °C, Horizontal Installation, Pulse Output Optional, MID
EW1100CC3900, SJ Water Meter Q3=10,DN32,Max 30°C, Connection type: G 1 1/2, Operating pressure (max.): 16 bar, Medium: Drinking water
EW1100CM3900, SJ Water Meter Q3=10-DN32-L260-T30-MBUS