Klepsan İSKİ 19K DN50 Dry-Dial Multi-Jet Cold Water Meter 300 mm
Klepsan İSKİ 19K DN50 Dry-Dial Multi-Jet Cold Water Meter 300 mm
- Klepsan İSKİ 19K dry-dial, multi-jet mechanical cold water meter
- Size DN50 (2”), meter thread G2½ B
- Permanent flow rate Q3 25 m³/h, overload flow rate Q4 31.25 m³/h
- Measuring range (R = Q3/Q1): R80, R100 or R160 (the applicable value is shown on the meter label)
- Temperature: cold water up to 50 °C
- Body length (L) 300 mm
- Installation: horizontal
- Reading: 5-roller mechanical register, suitable for optical reading; pulse output optional
- Maximum operating pressure 16 bar, pressure loss 0.63 bar
- MID: the equivalent model in the catalog is certified under 2014/32/EU (notified body 2275, Romania)
Klepsan Dry-Dial Multi-Jet Cold Water Meters
Klepsan dry-dial multi-jet cold water meters are manufactured by Klepsan in Istanbul. The size and flow values of the İSKİ 19K meter are the same as those of the KVS-19K model in the catalog; the technical data shown here are that model's catalog data.
Water enters the measuring chamber through multiple jets and turns the impeller. In the dry-dial mechanism, the roller register does not come into contact with water, and consumption is read directly from the rollers.
Key Features
- Long service life thanks to the multi-jet design
- Super-dry dial; vacuum-sealed mechanism with magnetic protection
- 5-roller register: maximum 99,999 m³, smallest scale interval 0.00005 m³
- With check valve; suitable for optical reading
- Special glass resistant to pressure and impact, 360° rotating cover
- Corrosion-resistant, electrostatically painted brass body
- Low pressure loss, suitable for drinking water; IP68 protection class
- Long-lasting, maintenance-free operation; the manufacturer provides long-term spare parts and service support
Other Models in the Series
| Model | Size | Connection thread | Body length (L) | Q3 (m³/h) |
|---|---|---|---|---|
| Klepsan İSKİ 2K | DN20 (¾”) | G1 B | 190 mm | 2,5 |
| Klepsan İSKİ 16K | DN25 (1”) | G1¼ B | 260 mm | 6,3 |
| Klepsan İSKİ 18K | DN40 (1½”) | G2 B | 300 mm | 16 |
| Klepsan İSKİ 19K (this product) | DN50 (2”) | G2½ B | 300 mm | 25 |
When replacing a meter, measure the length of the existing meter excluding the couplings; meters of the same size with different body lengths are not interchangeable.
Applications
- Building and block inlets
- Common areas, garden irrigation and booster pump lines
- Water inlets of offices, workshops and small facilities
Why Klepsan İSKİ 19K?
Four sizes from DN20 to DN50 cover different metering points, from the apartment line to the building inlet, with meters of the same design; since their dimensions and flow values are the same as those of the KVS-K models in the catalog, they can replace an existing meter without any changes to the pipework. Because they are manufactured in Türkiye, spare parts and supply are easy to obtain.
Installation, Reading and Re-verification
Install the meter in the cold water line in the horizontal position specified by the manufacturer, with the arrow on its body pointing in the direction of water flow. Use meter couplings of the correct size for the connection; a strainer upstream of the meter and an isolating valve before and after it make maintenance and replacement easier.
Check your local regulations for the periodic re-verification requirements of cold water meters.
For separating water meters and opening individual water accounts in Türkiye, see our guide to water meter separation and individual subscriptions.
Other models: DN50 Cold Water Meter · Cold water meters · All water meters · All products from this brand: Klepsan
| Meter Type | : | Cold Water |
| Body Size (DN) | : | DN50 (2″) |
| Meter Design | : | Multi-Jet |
| Permanent Flow Rate (Q3) | : | 25 m³/h |
| Body Length (L) | : | 300 mm |
| Connection Type | : | Threaded |
| Remote Reading | : | Pulse |
| Max. Water Temperature | : | 50 °C |