Boiler Room Manifold
Boiler Room Manifold Manufacturing
In a boiler room, the manifold is the main element that distributes water from the boiler(s) to the heating circuits and collects the return. Flow and return manifolds are usually made as a matched pair of the same size; a low-loss header (hydraulic separator) can be installed between them.
Key features of this manifold type
- Flow and return manifold pair with the required center-to-center spacing
- Flanged or threaded outlets for pump groups and valves
- Pressure gauge and thermometer pockets, drain and air vent connections
- UPN channel feet or wall brackets, prepared for insulation
Suitable materials
Sizes and capacity
| Header | Inner diameter | Recommended flow rate (1.0–1.5 m/s) | Approx. capacity (ΔT 20 K) |
|---|---|---|---|
| DN50 | 50 mm | 7.1 – 10.6 m³/h | 247 kW |
| DN65 | 65 mm | 11.9 – 17.9 m³/h | 417 kW |
| DN80 | 80 mm | 18.1 – 27.1 m³/h | 631 kW |
| DN100 | 100 mm | 28.3 – 42.4 m³/h | 986 kW |
| DN125 | 125 mm | 44.2 – 66.3 m³/h | 1.5 MW |
| DN150 | 150 mm | 63.6 – 95.4 m³/h | 2.2 MW |
| DN200 | 200 mm | 113.1 – 169.6 m³/h | 3.9 MW |
| DN250 | 250 mm | 176.7 – 265.1 m³/h | 6.2 MW |
| DN300 | 300 mm | 254.5 – 381.7 m³/h | 8.9 MW |
| DN400 | 400 mm | 452.4 – 678.6 m³/h | 15.8 MW |
| DN500 | 500 mm | 706.9 – 1,060.3 m³/h | 24.7 MW |
You can make your selection in the manifold configurator and review the diameter and center-to-center spacing calculation in the selection guide.
Frequently Asked Questions
What material is a boiler room manifold made of?
Depending on the project requirements, it is made as a stainless steel manifold, black steel pipe manifold or hot-dip galvanized manifold.
How can I send you the dimensions?
You can make your selection in the configurator or send your dimensioned drawing via WhatsApp.
How is the manifold price determined?
The price is calculated from the header material, the header diameter and length, the number and sizes of the branches (outlets), the connection type and the accessories required (valves, pressure gauge/thermometer pockets, drain, supports). That is why there are no list prices on these pages; you get a quote by making your selection in the configurator or by sending a drawing.
Up to what sizes do you manufacture?
We manufacture PPRC and HDPE manifolds with headers up to Ø400 mm, and stainless steel, hot-dip galvanized and black steel manifolds in DN500 and larger. The header length and center-to-center spacing are set according to the project.
Can I order without a drawing?
Yes. Simply choose the header diameter, the number and size of branches, the center-to-center spacing and the connection type in the configurator; we finalize the dimensions with you and submit them for your approval before manufacturing. If you have a dimensioned drawing, we build exactly to it.